
How needle electrolysis works
If you’re comparing thermolysis vs galvanic vs blend, start with what all three share. Each is a form of needle electrolysis. According to the American Electrology Association (AEA), a very fine probe, usually thinner than the hair being treated, is inserted into the follicle, and a small current destroys the hair growth cells. The AEA says you shouldn’t feel the probe going in.
When a follicle is properly treated, the AEA says the hair usually slides out without being pulled. Cleveland Clinic describes the same process: the current moves down the fine wire to the bottom of the follicle and destroys the hair root. That’s why electrolysis is a hair-by-hair treatment rather than one that covers a whole area at once.
Electrolysis is described as permanent removal of successfully treated follicles, and the AEA says it works regardless of skin color or hair type. The three methods differ in what the current does inside the follicle: a chemical reaction, heat, or both together. The AEA explains them on its page about how electrolysis works.
Galvanic electrolysis: the chemical method
In galvanic electrolysis, the AEA says the current produces a chemical reaction in the hair follicle that eliminates the hair growth cells. The follicle is treated chemically rather than with heat, which is the main thing that sets galvanic apart from thermolysis. You’ll sometimes see it described simply as the chemical method.
Like every method, galvanic depends on careful technique, because the probe has to sit correctly in the follicle for the growth cells to be reached. The AEA notes that breaking down the growth cells of deeper, coarser hairs may take more than one treatment, so some hairs need repeat visits whichever method is used.
Thermolysis electrolysis: the heat method
Thermolysis, also called short-wave, produces heat. The AEA says it heats and destroys the hair growth cells in the follicle. Cleveland Clinic says the skin where the needle enters may feel temporarily hot or like a pinch, and that you may feel a slight tingling.
With any method, you may see some redness afterward. Cleveland Clinic notes slight reddening of the skin during or right after treatment, and says people with darker skin may develop temporary dark spots. Those spots fade over time, and Cleveland Clinic advises against using bleaching cream on them.
Because thermolysis and galvanic act on the follicle in different ways, an electrologist trained in more than one method can choose between them for different hairs or areas. That judgment is made in the treatment room, based on what they see and how your skin responds, which is why the consultation conversation matters.
Blend electrolysis: combining both
Blend electrolysis combines galvanic current with thermolysis current. The AEA explains that the heat from thermolysis intensifies the chemical reaction of the galvanic current, so the two work together inside the follicle. In other words, blend isn’t a separate technology; it’s the two currents used at the same time.
It’s tempting to assume that combining two methods must make blend the strongest choice, but the AEA doesn’t rank it above the others. Its FAQ says galvanic, thermolysis and blend are all effective and deliver permanent results. The right choice depends on the person doing the work and the hair being treated.
Whatever the method, what you feel is similar. The AEA describes a momentary heat sensation or pinch, says discomfort is minimal for most people, and notes that individual tolerances vary greatly. If you’re nervous about comfort, ask how settings can be adjusted and whether you can try a short session first.
Thermolysis vs galvanic vs blend: how electrologists choose
There isn’t one best method for everyone. The AEA’s FAQ says all three are effective and permanent, and it doesn’t name a winner. What matters most is that each hair is properly treated, which depends on skill, consistency and a plan that fits your hair.
The AEA lists hair growth cycles, hormones, medications and stress among the factors that affect how long treatment takes. A good electrologist will explain why they’d use a particular method for your area and how they’ll adjust settings for your comfort. At Feeling Fabulous, Dorna is our electrologist; ask her at your consultation which method she uses for your hair and why.
One more question worth asking anywhere: is it true needle electrolysis? The AEA’s guide to choosing an electrologist warns that some salons and businesses advertise as electrologists but offer temporary hair removal or hair reduction instead. It says needle electrolysis is the only method that offers permanent hair removal, and recommends asking about sterile, disposable probes.
Session length, spacing and how many electrolysis sessions
Cleveland Clinic says a typical schedule is an appointment every week or every other week, with each treatment lasting between 15 minutes and an hour, and appointments continuing for up to a year and a half. The AEA says a visit can be a few minutes for a follow-up or about an hour for a larger area.
How many electrolysis sessions you’ll need depends on how much hair there is, how coarse it is, and factors like hormones. The AEA says most people who follow the recommended treatment plan can expect to be done or nearly done within 18 months. Nobody can promise an exact count before seeing your hair.
Consistency matters because hairs don’t all appear at once; they surface as they move through their growth cycles. Keeping your appointments lets your electrologist treat hairs as they show up. After each session, the AEA and Cleveland Clinic both advise avoiding excessive sweating, tanning, sun exposure and makeup on the area for 24 hours.
Finding electrolysis in Great Neck and Commack
Feeling Fabulous offers electrolysis for permanent hair removal at two offices. If you’re in Manhasset or nearby on the North Shore, our Great Neck office at 200 Middle Neck Rd is the closer one; in Suffolk, we’re at 635 Commack Rd. Both are open Sunday through Friday, 9am to 6pm, by appointment.
Bring your questions: which method Dorna recommends for your hair, how long sessions will run, how often to come in, how the area should be prepared and what to expect afterward. You can also read more about electrolysis on Long Island or see how laser and electrolysis compare.
When you’re ready, book a free consultation or call or text (516) 200-1243. After an assessment, you’ll get a personalized plan and quote, along with a clear idea of how often you’ll come in and what each session will involve. It’s also the right time to raise any questions about comfort or aftercare.
Questions, answered
What’s the difference between thermolysis, galvanic and blend?
All three are needle electrolysis, using a fine probe in the follicle. According to the American Electrology Association, galvanic uses current to create a chemical reaction that eliminates the growth cells, thermolysis, also called short-wave, uses heat, and blend combines both currents, with the heat intensifying the chemical reaction. Your electrologist can explain which they use for your hair.
Are all three methods permanent?
The American Electrology Association says galvanic, thermolysis and blend are all effective and deliver permanent results. Electrolysis is described as permanent removal of successfully treated follicles. Some deeper, coarser hairs may need more than one treatment, so a series of sessions is normal, and following the full plan matters more than the name of the method.
Does the probe hurt?
The American Electrology Association says you shouldn’t feel the probe going in, but you’ll likely feel a momentary heat sensation or pinch when the current is applied. Cleveland Clinic adds that you may feel a slight tingling. Discomfort is minimal for most people, according to the AEA, though tolerance varies a lot between individuals.
Is every ‘electrolysis’ service true needle electrolysis?
Not always. The American Electrology Association warns that some salons and businesses advertise as electrologists but offer temporary hair removal or hair reduction instead. It says needle electrolysis is the only method that offers permanent hair removal, so ask directly whether that is the service provided, and ask how probes are sterilized or whether they’re disposable.
How long does an electrolysis session take?
Cleveland Clinic says a treatment lasts anywhere between 15 minutes and one hour. The American Electrology Association says a follow-up can take just a few minutes, while a larger area can take about an hour. Your electrologist will suggest a length based on the area and the amount of hair being treated.
How many electrolysis sessions will I need?
It depends on how much hair there is, how coarse it is, and factors such as hormones and medications. Cleveland Clinic describes appointments every week or two for up to about a year and a half, and the American Electrology Association says most people who follow their plan are done or nearly done within 18 months.
This guide provides general education. Treatment suitability, risks, preparation, and aftercare should be discussed with your provider. Individual results vary.
